| Identification | More | [Name]
Zinc chloride | [CAS]
7646-85-7 | [Synonyms]
2-AMINO-2-HYDROXYMETHYL
2-AMINO-2-(HYDROXYMETHYL)-1,3-PROPANEDIOL
2-AMINO-2-(HYDROXYMETHYL)PROPANE-1,3-DIOL
2-AMINO-(HYDROXYMETHYL)-1,3-PROPANEDIOL
2-HYDROXYMETHYL-2-AMINO-1,3-PROPANEDIOL
4G 1MTRIS, PH 8.0
8VTE 1L
AMINOMETHYLIDINE TRIMETHANOL
ATX TRIS BUFFER
BUFFER TRIS
MOLE-READY-TRIS BASE
SIGMA 7-9(R)
SPECTRIS(R)
SPECTRIS(TM)
THAM
TIMTEC-BB SBB006714
TRI(HYDROXYMETHYL)AMINOMETHANE
TRIMETHYLOL AMINOMETHANE
TRIS
TRISAMINE | [EINECS(EC#)]
201-064-4 | [Molecular Formula]
Cl2Zn | [MDL Number]
MFCD00004679 | [Molecular Weight]
136.3 | [MOL File]
7646-85-7.mol |
| Chemical Properties | Back Directory | [Description]
Zinc chloride is a white deliquescent salt. It forms acidic solutions in water and in polar
organic solvents such as ethanol, acetone, and ether. Anhydrous zinc chloride hydrolyzes
with moisture to form hydrochloric acid. It also forms complex ions with water, ammonia,
and some organic solvents. Zinc chloride reacts with sulphide to minimise release of H2S
gas in waste treatment facilities. Zinc chloride 50% solution also serves as a high-quality
mercerising agent for cotton. Zinc chloride is incompatible with strong oxidising agents,
moisture, cyanides, sulphides, and potassium. | [Appearance]
White, granular, deliquescent crystals or
crystalline powder. A
10% solution is acid to litmus. Soluble in water,
alcohol, glycerol, and ether. | [Melting point ]
293 °C (lit.) | [Boiling point ]
732 °C (lit.) | [density ]
1.01 g/mL at 20 °C
| [vapor pressure ]
1 mm Hg ( 428 °C)
| [Fp ]
732°C | [storage temp. ]
2-8°C
| [solubility ]
H2O: 4 M at 20 °C, clear, colorless
| [form ]
crystalline
| [pka]
pKa 6.06 (Uncertain) | [color ]
white
| [Specific Gravity]
2.91 | [Odor]
wh. cubic cryst., odorless | [PH]
5 (100g/l, H2O, 20℃) | [Water Solubility ]
432 g/100 mL (25 ºC) | [Sensitive ]
Hygroscopic | [Merck ]
14,10132 | [Exposure limits]
ACGIH: TWA 1 mg/m3; STEL 2 mg/m3
OSHA: TWA 1 mg/m3
NIOSH: IDLH 50 mg/m3; TWA 1 mg/m3; STEL 2 mg/m3 | [Stability:]
hygroscopic | [InChIKey]
JIAARYAFYJHUJI-UHFFFAOYSA-L | [CAS DataBase Reference]
7646-85-7(CAS DataBase Reference) | [NIST Chemistry Reference]
Zinc dichloride(7646-85-7) | [EPA Substance Registry System]
7646-85-7(EPA Substance) |
| Hazard Information | Back Directory | [Chemical Properties]
Zinc chloride is white/colorless crystalline granules. | [General Description]
ZINC CHLORIDE, SOLUTION(7646-85-7) is a colorless liquid. ZINC CHLORIDE, SOLUTION(7646-85-7) is mildly corrosive to metals. ZINC CHLORIDE, SOLUTION(7646-85-7) causes burns to eyes, skin and mucous membranes. | [Reactivity Profile]
Acidic salts, such as ZINC CHLORIDE, are generally soluble in water. The resulting solutions contain moderate concentrations of hydrogen ions and have pH's of less than 7.0. They react as acids to neutralize bases. These neutralizations generate heat, but less or far less than is generated by neutralization of inorganic acids, inorganic oxoacids, and carboxylic acid. They usually do not react as either oxidizing agents or reducing agents but such behavior is not impossible. Many of these compounds catalyze organic reactions. | [Air & Water Reactions]
When dissolved in water, ZINC CHLORIDE, SOLUTION is a strong acid. [Handling Chemicals Safely 1980. p. 964] | [Health Hazard]
Exposures to zinc chloride cause adverse health effects and poisoning. On contact with the skin, zinc chloride causes skin burns and ulcerations, redness, eyes develop pain and blurred vision, and any splashes from solutions may cause eye damage. It is extremely
destructive to the tissues of the mucous membranes and upper respiratory tract. The
symptoms of toxicity include, but are not limited to, burning sensation, coughing, wheezing, laryngitis, shortness of breath, headache, nausea and vomiting, and irritation or corrosion to the gastrointestinal tract with abdominal pain. After repeated exposures of zinc
chloride through skin contact, occupational workers develop varying degrees of skin
problems, such as dermatitis and skin ulcerations. Repeated inhalation of zinc chloride
causes occupational asthma among workers | [Health Hazard]
Solid or water solution is astringent and can irritate the eyes. When ingested, can cause intoxication, severe irritation of stomach, nausea, vomiting, and diarrhea. | [Potential Exposure]
Zinc chloride is used in iron galvanizing;
as a wood preservative; for dry battery cells; as a soldering
flux; in textile finishing; in vulcanized fiber;
reclaiming rubber; in oil and gas well operations; oil refining;
manufacturing of parchment paper; in dyes; activated
carbon; in chemical synthesis; in adhesives; dentists’
cement; deodorants, disinfecting and embalming solutions;
and taxidermy. It is also produced by military screeningsmoke. | [Fire Hazard]
Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes. Some are oxidizers and may ignite combustibles (wood, paper, oil, clothing, etc.). Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated. | [First aid]
Move victim to fresh air. Call 911 or emergency
medical service. Give artificial respiration if victim is not
breathing. Do not use mouth-to-mouth method if victim
ingested or in haled the substance; give artificial respiration
with the aid of a pocket mask equipped with a one-way valve
or other proper respiratory medical device. Administer oxygen
if breathing is difficult. Remove and isolate contaminated
clothing and shoes. In case of contact with substance,
immediately flush skin or eyes with running water for at
least 20 minutes. For minor skin contact, avoid spreading
material on unaffected skin. Keep victim warm and quiet.
Effects of exposure (inhalation, ingestion or skin contact) to
substance may be delayed. Ensure that medical personnel
are aware of the material(s) involved and take precautions to
protect themselves. Medical observation is recommended for
24 to 48 hours after breathing overexposure, as pulmonary
edema may be delayed. As first aid for pulmonary edema,
a doctor or authorized paramedic may consider administering
a drug or other inhalation therapy.
| [Shipping]
UN2331 Zinc chloride, anhydrous, Hazard class: 8;
Labels: 8-Corrosive material. UN1840 Zinc chloride, solution,
Hazard class: 8; Labels: 8-Corrosive material. | [Incompatibilities]
Aqueous solutions are strongly acidic.
Incompatible with bases and potassium. Incompatible with
strong oxidizers (chlorates, nitrates, peroxides, permanganates,
perchlorates, chlorine, bromine, fluorine, etc.); contact
may cause fires or explosions. Keep away from
alkaline materials, strong bases, strong acids, oxoacids,
epoxides. Corrosive to metals. | [Waste Disposal]
Dump in water; add soda ash
and stir, then neutralize and flush to sewer with water.
Alternatively, zinc chloride may be recovered from spent
catalysts and used in acrylic fiber spinning solutions. | [Physical properties]
White crystalline powder or granules; hygroscopic; density 2.907 g/cm3; melts at 290°C; vaporizes at 732°C; vapor pressure 1 torr at 428°C and 20 torrat 536°C; highly soluble in water, 432 g/100mL at 25°C; aqueous solution acidic in litmus test; also soluble in ethanol, glycerol, and acetone. | [Definition]
ChEBI: A compound of zinc and chloride ions in the ratio 1:2. It exists in four crystalline forms, in each of which the Zn2+ ions are trigonal planar coordinated to four chloride ions. | [Definition]
zinc chloride: A white crystalline compound, ZnCl2. The anhydrous salt, which is deliquescent, can be made by the action of hydrogen chloride gas on hot zinc; r.d. 2.9; m.p. 283°C; b.p. 732°C. It has a relatively low melting point and sublimes easily, indicating that it is a molecular compound rather than ionic. Various hydrates also exist. Zinc chloride is used as a catalyst, dehydrating agent, and Ûux for hard solder. It was once known as butter of zinc. | [Hazard]
Inhalation of zinc chloride fumes can injure lungs and respiratory tract. Dusts or fumes also cause dermatitis, boils, conjunctivitis, and gastrointestinal tract upset (Lewis(Sr), R.J. 1996. Sax’s Dangerous Properties of Industrial Materials, 9th ed. New York: Van Nostrand Reinhold). LD50 oral (rat): 350mg/kg LCLO (inhalation): 1.960 g/m3/10 min. | [Purification Methods]
The anhydrous material can be sublimed under a stream of dry HCl, followed by heating to 400o in a stream of dry N2. It sublimes at high vacuum. Also purify it by refluxing (50g) in dioxane (400mL) with 5g zinc dust, filtering hot and cooling to precipitate ZnCl2. Crystallise it from dioxane and store it in a desiccator over P2O5. It has also been dried by refluxing in thionyl chloride. [Weberg et al. J Am Chem Soc 108 6242 1986.] Hygroscopic: minimal exposure to the atmosphere is necessary. [Wagenknecht & Juza Handbook of Preparative Inorganic Chemistry (Ed. Brauer) Academic Press Vol II p 1070 1965.] |
| Safety Data | Back Directory | [Hazard Codes ]
Xi,N,C,F+,F | [Risk Statements ]
R36/37/38:Irritating to eyes, respiratory system and skin .
R50/53:Very Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment .
R34:Causes burns.
R22:Harmful if swallowed.
R51/53:Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment .
R67:Vapors may cause drowsiness and dizziness.
R66:Repeated exposure may cause skin dryness or cracking.
R19:May form explosive peroxides.
R12:Extremely Flammable.
R11:Highly Flammable. | [Safety Statements ]
S26:In case of contact with eyes, rinse immediately with plenty of water and seek medical advice .
S36:Wear suitable protective clothing .
S61:Avoid release to the environment. Refer to special instructions safety data sheet .
S60:This material and/or its container must be disposed of as hazardous waste .
S45:In case of accident or if you feel unwell, seek medical advice immediately (show label where possible) .
S36/37/39:Wear suitable protective clothing, gloves and eye/face protection . | [RIDADR ]
UN 2924 3/PG 1
| [WGK Germany ]
2
| [RTECS ]
TY2900000
| [F ]
3 | [TSCA ]
Yes | [HazardClass ]
3 | [PackingGroup ]
I | [HS Code ]
28273600 | [Precautions]
Exposures to zinc chloride are dangerous, corrosive, and cause burns to any area of contact. Harmful if swallowed or inhaled. Affects the cardiovascular system. | [Safety Profile]
Poison by ingestion,
intravenous, and intraperitoneal routes.
Human systemic effects by inhalation: pulm-
onary changes. An experimental teratogen.
Experimental reproductive effects.
Questionable carcinogen with experimental tumorigenic data. Human mutation data
reported. A corrosive irritant to skin, eyes,
and mucous membranes, Exposure to ZnCl2
fumes or dusts can cause dermatitis, boils,
conjunctivitis, gastrointestinal tract upsets.
The fumes are highly toxic. Incompatible
with potassium. Mixtures of the powdered
chloride and powdered zinc are flammable.
When heated to decomposition it emits
toxic fumes of Cland ZnO. See also ZINC
COMPOUNDS and CHLORIDES. | [Hazardous Substances Data]
7646-85-7(Hazardous Substances Data) | [IDLA]
50 mg/m3 |
| Questions And Answer | Back Directory | [Chemical properties]
White granular crystal or powder of hexagonal system, highly soluble in water, soluble in methanol, ethanol, glycerine, acetone, diethyl ether but Insoluble in liquid ammonia.
| [Water solubility (g/100ml)]
Water solubility Solubility in 100 ml of water at different temperatures 342g/0℃;353g/10℃;395g/20℃;437g/30℃;452g/40℃;488g/60℃;541g/80℃;614g/100℃ | [Applications]
Used as dehydrating and condensing agent in organic synthesis industry and catalyst for production of vanillin, Cyclamen aldehyde, anti-inflammatory painkillers and cation exchange resin; Used as solvent of polyacrylonitrile; Used as mordant, Mercerizing agent and sizing agent in Dyeing industry; used as the raw material for the production of fiber can and shuttle(cosolvent for cotton fibre) to improve the fiber adhesion force; used as stabilizers for ice dye chromogenic salt in Dye industry in the production of reactive dye and cationic dye; Used as oil purifying agent and activating agent for Activated carbon; Used for impregnating wood to provide corrosion resistance and flame retardancy; Used as flame retardant for cardboard and cloth products; Used for electroplating; Used as welding flux for welding electrode; Used for the production of aluminum alloy, light metal deacidification and the processing of metal surface oxide layer in Metallurgical industry; Used in the production of blueprint paper; Used as battery electrolyte; Used as the raw material for the production of Alcohol resistant foam extinguishing agent and zinc cyanide. Also used in medicine and medicine production. |
| Questions and Answers (Q&A) | Back Directory | [Uses]
Zinc chloride is used as a wood preservative and in fireproofing timber. Other uses are as a deodorant in disinfecting fluids; in dental cements; in electroplating; in etching metals and glass; as flux for soldering; as a mordant in printing and dyeing textiles; in making dry batteries; in denaturing alcohols; in vulcanizing rubber; in manufacturing parchment; in making artificial silk; in making activated carbon and cold-water glues; and in refining petroleum. Also, zinc chloride is used as a dehydrating and condensing agent in organic syntheses. In medicine it is used as an astringent and antiseptic.
| [Preparation]
Zinc chloride is prepared by the reaction of zinc oxide or zinc metal with dilute hydrochloric acid, followed by crystallization:
ZnO + 2HCl → ZnCl2 + H2O
Zn + 2HCl → ZnCl2 + H2
| [Toxicity]
Inhalation of zinc chloride fumes can injure lungs and respiratory tract. Dusts or fumes also cause dermatitis, boils, conjunctivitis, and gastrointestinal tract upset (Lewis(Sr), R.J. 1996. Sax’s Dangerous Properties of Industrial Materials, 9th ed. New York: Van Nostrand Reinhold).
LD50 oral (rat): 350mg/kg
LCLO (inhalation): 1.960 g/m3/10 min
|
|
|