ChemicalBook--->CAS DataBase List--->79-06-1

79-06-1

79-06-1 Structure

79-06-1 Structure
IdentificationMore
[Name]

Acrylamide
[CAS]

79-06-1
[Synonyms]

2-PROPENAMIDE
ACRYL-40(TM)
ACRYLAMIDE
ACRYLAMIDE 2K
ACRYLAMIDE 4K
ACRYLAMIDE-HG
ACRYLAMIDE HGX
ACRYLAMIDE MONOMER
ACRYLIC ACID AMIDE
ETHYLENECARBOXAMIDE
PREMIX ACRYLAMIDE
PROPENAMIDE
2-Propeneamide
aam
acrylagel
Acrylamid
acrylamide(non-specificname)
acrylamide(solide)
acrylamide(solutions)
acrylamide,hydrate
[EINECS(EC#)]

201-173-7
[Molecular Formula]

C3H5NO
[MDL Number]

MFCD00008032
[Molecular Weight]

71.08
[MOL File]

79-06-1.mol
Chemical PropertiesBack Directory
[Appearance]

Acrylamide, in monomeric form, is an odorless, flake-like crystals. May be dissolved in a flammable liquid
[Melting point ]

82-86 °C(lit.)
[Boiling point ]

125 °C25 mm Hg(lit.)
[density ]

1,322 g/cm3
[vapor density ]

2.45 (vs air)
[vapor pressure ]

0.03 mm Hg ( 40 °C)
[refractive index ]

1.460
[Fp ]

138 °C
[storage temp. ]

2-8°C
[solubility ]

H2O: 50 mg/mL at 20 °C, clear, colorless
[form ]

powder
[pka]

15.35±0.50(Predicted)
[color ]

White
[Odor]

Odorless solid
[PH]

5.0-7.0 (50g/l, H2O, 20℃)
[Stability:]

Unstable. Do not heat above 50C. Explosive. Incompatible with acids, bases, oxidizing agents, reducing agents, iron and iron salts, copper, aluminium, brass, free radical initiators. Air sensitive. Hygroscopic.
[Water Solubility ]

SOLUBLE, 216 g/100 mL
[Sensitive ]

Light Sensitive
[Merck ]

14,129
[BRN ]

605349
[Henry's Law Constant]

(x 10-9 atm?m3/mol): 3.03 at 20 °C (approximate - calculated from water solubility and vapor pressure)
[Exposure limits]

Potential occupational carcinogen. NIOSH REL: TWA 0.03, IDLH: 60; OSHA PEL: TWA 0.3; ACGIH TLV: TWA 0.03.
[Contact allergens]

Acrylamide is used in the plastic polymers industry for water treatments and soil stabilization and to prepare polyacrylamide gels for electrophoresis. This neurotoxic, carcinogenic, and genotoxic substance is known to have caused contact dermatitis in industrial and laboratory workers
[InChIKey]

HRPVXLWXLXDGHG-UHFFFAOYSA-N
[CAS DataBase Reference]

79-06-1(CAS DataBase Reference)
[IARC]

2A (Vol. 60, Sup 7) 1994
[NIST Chemistry Reference]

Acrylamide(79-06-1)
[Storage Precautions]

Store under inert gas
[EPA Substance Registry System]

79-06-1(EPA Substance)
Hazard InformationBack Directory
[Definition]

ChEBI: A member of the class of acrylamides that results from the formal condensation of acrylic acid with ammonia.
[General Description]

A solution of a colorless crystalline solid. Flash point depends on the solvent but below 141°F. Less dense than water. Vapors heavier than air. Toxic oxides of nitrogen produced during combustion. Used for sewage and waste treatment, to make dyes and adhesives.
[Reactivity Profile]

ACRYLAMIDE SOLUTION reacts with azo and diazo compounds to generate toxic gases. Flammable gases are formed with strong reducing agents. Combustion generates mixed oxides of nitrogen (NOx). Spontaneous, violent polymerization occurs at the melting point (86°C of the undissolved solid [Bretherick, 5th ed., 1995, p. 428].
[Air & Water Reactions]

Acrylamide is very soluble in water. The solvent is not necessarily water soluble.
[Health Hazard]

Inhalation or contact with material may irritate or burn skin and eyes. Fire may produce irritating, corrosive and/or toxic gases. Vapors may cause dizziness or suffocation. Runoff from fire control or dilution water may cause pollution.
[Potential Exposure]

Added to water during sewage/wastewater treatment. Used in the manufacture of plastics, resins, rubber, synthetic textiles; as a dye, pigment. A major application for monomeric acrylamide is in the production of polymers as polyacrylamides. Polyacrylamides are used for soil stabilization, gel chromatography, electrophoresis, papermaking strengtheners, clarifications, and treatment of potable water and foods.
[First aid]

If this chemical gets into the eyes, remove any contact lenses at once and irrigate immediately. If thischemical contacts the skin, flush with water immediately. If a person breathes in large amounts of this chemical, move the exposed person to fresh air at once and perform artificial respiration. When this chemical has been swallowed, get medical attention. Give large quantities of water and induce vomiting. Do not make an unconscious person vomit.
[Shipping]

UN2074 Acrylamide, Hazard Class: 6.1; Labels: 6.1-Poisonous materials
[Incompatibilities]

Acrylamide may decompose with heat and polymerize at temperatures above 84 C, or exposure to light, releasing ammonia gas. Reacts violently with strong oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause fires or explosions. Keep away from alkaline materials, strong bases, strong acids, oxoacids, epoxides. Reacts with reducing agents; peroxides, acids, bases, and vinyl polymerization initiators. Fine particles of dust form explosive mixture with air.
[Waste Disposal]

Consult with environmental regulatory agencies for guidance on acceptable disposal practices. Generators of waste containing this contaminant (≥100 kg/mo) must conform with EPA regulations governing storage, transportation, treatment, and waste disposal. Acrylamide residue and sorbent material may be packaged in epoxy-lined drums and taken to an EPAapproved disposal site. Incineration with provisions for scrubbing of nitrogen oxides from flue gases. Deep well injection.
[Preparation]

The principal synthetic route to making acrylamide involves the hydration of acrylonitrile (ACRN). In this process an aqueous ACRN solution reacts over a copper-oxide-chromium oxide catalyst at approximately 100°C. Several other catalyst systems have been used, and most of them contain copper - in some form. The reaction step is followed by purification and concentration to a 50% solution in a vacuum evaporator. The yield of acrylamide from ACRN is 98%. The purification and concentration steps are costly and also involve the recycle of ACRN back to the reaction step. In the early part of the new century, a catalytic distillation process has been developed that converts almost 100% of the ACRN to acrylamide and allows concentration to occur in the same column where acrylamide is made. Therefore this process is less costly.
Nitto Chemical (now Dia-Nitrix) introduced a biosynthetic route from ACRN to acrylamide in Japan in 1985. This process uses an immobilized nitrile hydratase biocatalyst that converts the ACRN solution to acrylamide with a yield of 99.5%. This high yield allows a concentrated acrylamide solution to be made without the need for ACRN recycle or solution concentration. This process therefore has lower energy costs.
[Flammability and Explosibility]

The volatility of acrylamide is low (0.03 mmHg at 40 °C), and it does not pose a significant flammability hazard.
[Chemical Reactivity]

Reactivity with Water No reaction; Reactivity with Common Materials: Data not available; Stability During Transport: Stable; Neutralizing Agents for Acids and Caustics: Not pertinent; Polymerization: May occur at temperature above 50°C (120°F); Inhibitor of Polymerization: Oxygen (air) plus 50 ppm of copper as copper sulfate.
[Biochem/physiol Actions]

Acrylamide is a reactive, water soluble vinyl monomer. It causes a decrease in the number of neuritis per cell as well as reduces the rate of protein synthesis.
[Carcinogenicity]

Acrylamide is reasonably anticipated to be a human carcinogen based on sufficient evidence of carcinogenicity from studies in experimental animals.
[Environmental Fate]

Biological. Bridié et al. (1979) reported BOD and COD values of 0.05 and 1.33 g/g using filtered effluent from a biological sanitary waste treatment plant. These values were determined using a standard dilution method at 20 °C for a period of 5 d. When a sewage seed was used in a separate screening test, a BOD value of 0.92 g/g was obtained. In a treatment plant, a BOD value of 0.40 g/g was reported after 10 d (Mills et al., 1953). The ThOD for acrylamide is 1.35 g/g.
Soil. Under aerobic conditions, acrylamide degraded to ammonium ions which oxidized to nitrite ions and nitrate ions. The ammonium ions produced in soil may volatilize as ammonia or accumulate as nitrite ions in sandy or calcareous soils (Abdelmagid and Tabatabai, 1982).
Chemical/Physical. Readily polymerizes at the melting point or under UV light. In the presence of alkali, polymerization is a violent reaction. On standing, may turn to yellowish color (Windholz et al., 1983).
[storage]

In particular, this substance should be handled only when wearing appropriate impermeable gloves to prevent skin contact, and all operations that have the potential of producing acrylamide dusts or aerosols of solutions should be conducted in a fume hood to prevent exposure by inhalation.
[Purification Methods]

Crystallise acrylamide from acetone, chloroform, ethyl acetate, methanol or *benzene/chloroform mixture, then vacuum dry and store it in the dark under vacuum. Recrystallise it from CHCl3 by dissolving 200g in 1L, heating to boiling and filtering without suction in a warmed funnel through Whatman 541 filter paper; allowing to cool to room temperature and keeping at -15o overnight. The crystals are collected with suction in a cooled funnel and washed with 300mL of cold MeOH. The crystals are air-dried in a warm oven. [Dawson et al. Data for Biochemical Research, Oxford Press 1986 p. 449, Beilstein 2 IV 1471.] CAUTION: Acrylamide is extremely TOXIC (neurotoxic), and precautions must be taken to avoid skin contact or inhalation. Use gloves and handle in a well-ventilated fume cupboard.
[Toxicity evaluation]

All acrylamide in the environment is synthetic, the main source being the release of the monomer residues from polyacrylamide used in water treatment or in industry. Products and compounds containing polyacrylamide can serve as sources of exposure to residues of acrylamide.
Safety DataBack Directory
[Hazard Codes ]

T
[Risk Statements ]

R45:May cause cancer.
R20/21:Harmful by inhalation and in contact with skin .
R25:Toxic if swallowed.
R36/38:Irritating to eyes and skin .
R43:May cause sensitization by skin contact.
R48/23/24/25:Toxic: danger of serious damage to health by prolonged exposure through inhalation, in contact with skin and if swallowed .
R62:Possible risk of impaired fertility.
R48/20/21/22:Harmful: danger of serious damage to health by prolonged exposure through inhalation, and in contact with skin and if swallowed .
R22:Harmful if swallowed.
R24/25:Toxic in contact with skin and if swallowed .
[Safety Statements ]

S53:Avoid exposure-obtain special instruction before use .
S45:In case of accident or if you feel unwell, seek medical advice immediately (show label where possible) .
S24:Avoid contact with skin .
S36/37/39:Wear suitable protective clothing, gloves and eye/face protection .
S26:In case of contact with eyes, rinse immediately with plenty of water and seek medical advice .
S36/37:Wear suitable protective clothing and gloves .
[RIDADR ]

UN 3426 6.1/PG 3
[WGK Germany ]

3
[RTECS ]

AS3325000
[F ]

8-10
[TSCA ]

Yes
[HazardClass ]

6.1
[PackingGroup ]

III
[HS Code ]

29241900
[Safety Profile]

Confirmed carcinogen with experimental carcinogenic and neoplastigenic data. Poison by ingestion, skin contact, and intraperitoneal routes. Experimental reproductive effects. Mutation data reported. A skin and eye irritantIntoxication from it has caused a peripheral neuropathy, erythema, and peeling palms. In industry, intoxication is mainly via dermal route, next via inhalation, and last via ingestion. Time of onset varied from 1-24 months to 8 years. Symptoms were, via dermal route, a numbness, tingling, and touch tenderness. In a couple of weeks, coldness of extremities; later, excessive sweating, bluish-red and peeling palms, marked fatigue and limb weakness. It is dangerous because it can be absorbed through the unbroken skin. From animal experiments it seems to be a central nervous system toxin. Adult rats fed an average of 30 mg/kg for 14 days were all partially paralyzed and had reduced their food consumption by 50 percent. Polymerizes violently at its melting point. When heated to decomposition it emits acrid fumes and NOX,.
[Hazardous Substances Data]

79-06-1(Hazardous Substances Data)
[IDLA]

60 mg/m3
Raw materials And Preparation ProductsBack Directory
[Raw materials]

Ammonia-->Acrylonitrile-->Acrylic acid-->Poly(acrylic acid)-->DOYLE DIRHODIUM CATALYST-RH2(4S-MEOX)4-->Phenothiazine-->NS-398
[Preparation Products]

Acrylic acid-->Poly(acrylic acid)-->Butyl acrylate-->Ethyl acrylate-->Polyacrylamide-->Taurine-->Chitosan-->Moclobemide-->TRIS(2-AMINOETHYL)AMINE-->Viscosity increaser-->acrylic resin coating finish-->modified acrylic resin emulsion J-->binding agent for screen printing-->amphoteric polyacrylamide-->Methacrylic acid, polymer with butyl acrylate and methyl methacrylate-->binding agent SH-821-->deepening agent TR in pigment dying-->super absorbent resin synthesized by microwave cation ion radiation-->N-Methylolacrylamide-->binding agent RF type Dongfeng-->new fixing agent-->PR-I retanning agent-->fltrate reducer JST501-->modified acrylic resin emulsion BN-->high-hydroscopic resin (2)-->Polyacrylamide dry powder,cationic-->Polyacrylamide dry powder,non-ionic-->3-Hydrazinylpropanamide-->Ca-copolyacrylate-->Polyquaternium-7-->N,N'-Methylenebisacrylamide-->high-hydroscopic resin (3)-->methylene polyacrylamide-->Basic Blue 66-->thermofusion dyeing leveler PA-->WPT-S silicone modified water proof. fatliquoring and retanning agent-->5,6-DIHYDROURACIL-->leveler CGK-->dimethyldiallyl ammonium chloride acrylamide copolymer-->Cation flocculant
Material Safety Data Sheet(MSDS)Back Directory
[msds information]

Ethylenecarboxamide(79-06-1).msds
Questions And AnswerBack Directory
[description]

Acrylamide is a white crystalline chemical substance and is a raw material for production of polyacrylamide. Solid acrylamide (abbreviated AM) is usually colorless and transparent flaky crystals with pure product being white crystalline solid which is soluble in water, methanol, ethanol, propanol, and slightly soluble in ethyl acetate, chloroform, and benzene. It can be hydrolyzed to acrylic acid in acidic or alkaline environment.
Acrylamide is a large class of the parent compound of monomers including methacrylamide, the AMPS (anionic monomer, 2-Acraylamide-2-Methyl Propane Sulfonic Acid), the DMC (cationic monomer, methyl-acryloyloxyethyl trimethyl ammonium chloride) and N-substituted acrylamide compound.
Acrylamide
Occupational exposure is mainly seen in acrylamide production and the synthesis of resins, adhesives, etc. It is also possible for contract in underground construction, upon soil improvement, painting, paper industry and garment processing.
At daily life, people can touch it in smoking, drinking and eating the starchy foods processed at high temperature.
[Chemical Properties]

Acrylamide is odorless and colorless crystal. It is soluble in water, ethanol, acetone, ether, and methyl chloroform, and slightly soluble in toluene but insoluble in benzene. Acrylamide is a water-soluble monomer with two reactive centers (a vinyl group - with its reactive double bond, and an amide group). Because of its high reactivity, aqueous acrylamide monomer is stabilized with dissolved cupric salts and oxygen to prevent polymerization during shipping and storage.
[Synthesis]

At the end of 19th century, people had first made acrylamide using propylene chloride and ammonia.
In 1954, American Cyanamid Company uses sulfuric acid hydrolysis of acrylonitrile for industrial production.
In 1972, Mitsui Toatsu Chemicals, Inc. had first established the skeleton copper (see the metal catalyst) catalyzed acrylamide synthesis via acrylonitrile hydration. Then other countries have developed different types of catalyst and applied this technology for industrial production.
In 1980s, Japanese Nitto Chemical Industry Company has achieved that using biological catalyst for industrial production of acrylamide from acrylonitrile.
Sulfuric acid hydration way
Acrylonitrile and water is hydrolyzed into acrylamide sulfate in the presence of sulfuric acid and then treated neutralized liquid ammonia to give ammonium sulfate and acrylamide:
CH2 = CHCN + H2O + H2SO4 → CH2 = CHCONH2 • H2SO4 CH2 = CHCONH2 • H2SO4 + 2NH3→ CH2 = CHCONH2 + (NH4) 2SO4
The disadvantage of this method is by-producing a large number of low-value, low fertilizing efficacy-ammonium sulfate and causing serious sulfuric acid corrosion and pollution.
Catalytic hydration way
Acrylonitrile is reacted with water by the copper-based catalyst to have liquid phase hydration reaction at 70~120 °C at 0.4MPa pressure.
CH2 = CH-CN + H2O → CH2 = CHCONH2; Filter the catalyst after reaction catalyst; recycle the unreacted acrylonitrile; acrylamide solution was concentrated and cooled to give crystals. This is a simple method with the yield up to 98%.
[Polymerization]

For polymerization of acrylamide, people generally applies chemical catalytic systems or photocatalytic systems.
(1) Chemical catalyst system: chemical catalytic polymerization of acrylamide is done in the systems containing the trigger and accelerator. Trigger reagents participating the reaction include ammonium persulfate (or potassium persulfate) and hydrogen peroxide while the accelerator includes dimethylamine propionitrile and so on. Because the polymerization of acrylamide can performed under both acidic or alkaline conditions, so the choice of trigger and accelerator should be changed with pH.
When the aqueous solution of acrylamide (Arc), cross-linking agent (Bis) and tetramethylethylenediamine (tetramethyl ethylene diamine, TEMED) is added into ammonium persulfate (ammoniumpersulfate, AP), AP [(NH4) 2S20s] immediately generate radical (S: OU-2S07), after the reaction between Arc and the free radicals, then it becomes "activate", activated Arc connects with each other to form a long chain poly. The solution containing this polymer chain, although is sticky but can’t form a gel and can form into a gel only when Bis is also presented. In the AP-TEMED catalyzed system, the initiating polymerization rate between Arc and Bis is positively proportional to the square root of the concentration of AP and can occur rapidly under alkaline conditions. For example, the complete polymerization of 7% Arc, only needs 0.5 h upon pH8.8; however, needs 1.5 h upon pH4.3. In addition, temperature, oxygen molecules and other impurities will also affect the rate of polymerization. Usually faster polymerization occurs at room temperature than at 0 °C; Solution subjecting to pre-pumping also has faster polymerization rate than that without pre-puming.
(2) Photocatalytic System: This catalysis of this system is vitamin B2. Photo-polymerization process is catalyzed at light excitation. Vitamin B: in the presence of oxygen and ultraviolet light, can produce products containing free radicals whose function is similar as AP agent described above. The mixture is usually placed next to a fluorescent lamp where the reaction can take place. When using Vitamin B2 for catalyzing, TEMED is not demaned, but adding it can accelerate the rate of polymerization. Gel formed by photo-polymerization is milky white like with poor transparency. The advantage of using this catalyst is that it needs a very small amount (1ml/100mi) without any adverse effect on the analysis of samples; polymerization time can be extended or shortened by chaning the light intensity and time.
The apertube of chemical polymerization is smaller thant that of photo-polymerization. The reproducibility and transparency is also better for the former one than the latter one. However, the trigger of the chemical polymerization, AP, is a strong oxidizing agent, tend to cause loss of activity of certain protein molecules if remaining in the gel or cause distortion on the electrophoresis pattern.
[Uses]

1. It can be used as a monomer of polyacrylamide. Its polymer or copolymer is used as chemical grouting materials, soil conditioners, flocculants, adhesives and coatings.
2. Polyacrylamide, when used as a kind of additive, can improve the oil recycling efficiency. When used as flocculants, it can be used for sewage treatment. It can also be used as a paper strength agent.
3. Acrylamide is the most important products in acrylamide and methacrylamide-based products. Since its application in industry in 1954, the demand gradually increase. It is mainly used for the preparation of water soluble polymers which can be used as additives to improve oil recovery; as a flocculant, thickening agents, and paper additives. A small amount of acrylamide is introduce the hydrophilic center into the lipophilic polymer to improve the viscosity, increase the softening point and improve anti-solvents ability of resin, and can aso introduce a center for the coloring property of dye. Acrylamide is also often used as a component of the photopolymer. For the vinyl polymer, its crosslinking reaction can take advantage of this kind of reactive amide groups. Acrylamide can co-polymerizze with certain monomers such as vinyl acetate, styrene, vinyl chloride, vinylidene chloride, and acrylonitrile to obtain a polymer with a variety of applications.
The main application areas: (1) used for the oilfield; the materials can be used in oilfield injection of wells for adjustment of the injection profile. Mix this product with initiator, and deaerator and inject into the high permeability layer part of water wells. This will lead the formation of high-viscosity polymer unearth of the stratum. This can plug the large pore, increase the swept volume of oil, and enhance the oil recovery. In addition, the product polymer or copolymer can be used for tertiary oil recovery, fracturing, water shutoff, drilling mixing process and chemical grouting. (2) It can be used as flocculants. Its partially hydrolyzed product and its graft copolymer of methyl cellulose can be used in wastewater treatment and sewage treatment. (3) Soil conditioner; using the hydrolyzed product as soil amendments can aggregate soil and can improve air circulation, water permeability and water retention. (4) Modification of fiber and resin processing; using acrylamide for carbamylation or graft polymerization can improve the resin arrangement of a variety of fiber containing synthetic fiber, as well as for warp and printing paste in order to improve the basic physical properties of fabrics as well as preventing wrinkle, shrink and keeping a good hand feeling. (5) It can be used as paper enhancer; copolymer of acrylamide and acrylic acid or partial hydrolysis products of polyacrylamide can be used as paper strength reinforcing agent for either replacing or combining with starch, and water-soluble amino resin. (6) it can be used as an adhesive agent including glass fiber adhesive agent with the combination of phenolic resin and polyacrylamide solution, as well as pressure sensitive adhesive combined with synthetic rubber.
4. It is the raw material for producing polyacrylamide and related products.
5. It can be used as the monomer of polyacrylamide. Its polymer or copolymer can be used as chemical grouting materials, soil conditioners, flocculants, adhesives and coatings. Polyacrylamide, as an additive, can improve oil recovery. As a kind of flocculants, it can be used for waste water treatment as well as paper strength enhancer can. It is the raw material for producing polyacrylamide and related products. It can also used for determining the relative molecular weight of acid.
[Toxicity]

LD50 i.p. in mice: 170 mg/kg (Peterson, Sheth)
[Production methods]

1. Acrylonitrile sulfate hydration; Acrylonitrile and water is hydrolyzed into acrylamide sulfate in the presence of sulfuric acid and then treated neutralized liquid ammonia to give ammonium sulfate and acrylamide: The reaction products further undergoes filtering and separation. Crystallize the filtrate, dry to obtain the final product. The disadvantage of this method is by-producing a large number of low-value, low fertilizing efficacy-ammonium sulfate and causing serious sulfuric acid corrosion and pollution. This method can produce by-products of 2280 kg ammonium sulfate in per tons of acrylonitrile.Material consumption amount: Acrylonitrile (100%) 980kg/t, sulfuric acid (100%) 200kg/t, ammonia (100%) 700kg/t.
2. Direct hydration of acrylonitrile: acrylonitrile is directly hydrated by water with copper being the catalyst at 85-125 °C and 0.3-0.4MPa pressure. The yielding aqueous solution of acrylamide (containing only small amounts of by-products) can be directly sold as a finished product. This method avoids acrylamide dust pollution and is advantageous for labor protection for using aqueous solution. Reference Product Specifications: appearance: white flakes or powder. With first-grade product containing content ≥95%; Secondary-grade content ≥90%; grade III content ≥85%.
3. Enzyme catalysis; at room temperature transfer the acrylonitrile solution into the fixed-bed reactor containing bacteria catalyst; after the reaction, 100% of acrylonitrile is converted into acrylamide. After isolation and even without the necessity of refining and concentration, we can get the acrylamide industrial products.
4. Concentrated sulfuric acid hydration method: mixture containing sulfate, phenothiazine (polymerization inhibitor), and water is added to the reactor; stir slowly with dropping acrylonitrile After the addition is completed, raise the temperature to 95~100 °C, keep the temperature for 50 min. Cool to 20~25 °C, dilute with an appropriate amount of water, neutralize with sodium carbonate, filtrate to obtain aqueous acrylic acid solution. Further cool and crystallize, separate, dry to obtain the completed products.
5. Catalytic hydration method; acrylonitrile and water undergoes liquid phase hydration in the presence of copper-based catalyst; It is generally used for continuous production with the reaction temperature being 85~120 °C, reaction pressure being 0.29~0.39 MPa, feed concentration of 6.5%, airspeed being 5 L/ h, the conversion rate being 85%, and selectivity being about 95% and the concentration of acrylamide in the reaction being 7% to 8%. Aqueous solution obtained by this method may be directly used as the product for sale.
Spectrum DetailBack Directory
[Spectrum Detail]

Acrylamide(79-06-1)MS
Acrylamide(79-06-1)1HNMR
Acrylamide(79-06-1)13CNMR
Acrylamide(79-06-1)IR1
Acrylamide(79-06-1)IR2
Acrylamide(79-06-1)Raman
Well-known Reagent Company Product InformationBack Directory
[Acros Organics]

Acrylamide ultra sequencing gel, 4%, ready-to-use solution, for biochemistry(79-06-1)
[Alfa Aesar]

Acrylamide, electrophoresis grade, 99+%(79-06-1)
[Sigma Aldrich]

79-06-1(sigmaaldrich)
79-06-1 suppliers list
Company Name: Tianjin Zhongxin Chemtech Co., Ltd.
Tel: +86-022-66880623 +8618622897568 , +8618622897568
Website: http://www.tjzxchem.com
Company Name: Capot Chemical Co.,Ltd.
Tel: 571-85586718 +8613336195806 , +8613336195806
Website: http://www.capotchem.com
Company Name: Henan Tianfu Chemical Co.,Ltd.
Tel: +86-0371-55170693 +86-19937530512 , +86-19937530512
Website: https://www.tianfuchem.com/
Company Name: Shanghai Time Chemicals CO., Ltd.
Tel: +86-021-57951555 +8617317452075 , +8617317452075
Website: http://www.time-chemicals.com
Company Name: Hangzhou FandaChem Co.,Ltd.
Tel: 008657128800458; +8615858145714 , +8615858145714
Website: http://www.fandachem.com
Company Name: Hefei TNJ Chemical Industry Co.,Ltd.
Tel: +86-0551-65418679 +86-18949832763 , +86-18949832763
Website: http://www.tnjchem.com
Company Name: Hubei Jusheng Technology Co.,Ltd.
Tel: 18871490254
Website: www.hubeijusheng.com
Company Name: Yunbio Tech Co.,Ltd.
Tel: +86-010-60605551 +86-18046518538 , +86-18046518538
Website: https://yunbiopharm.com/
Company Name: Hubei xin bonus chemical co. LTD
Tel: 86-13657291602
Website: www.chemicalbook.com/ShowSupplierProductsList1549548/0.htm
Company Name: Shandong chuangyingchemical Co., Ltd.
Tel: 18853181302
Website: www.chemicalbook.com/ShowSupplierProductsList103425/0.htm
Company Name: Shanghai Longyu Biotechnology Co., Ltd.
Tel: +8615821988213 , +8615821988213
Website: https://www.chemicalbook.com/manufacturer/shanghai-longyu-biotechnology-164/
Company Name: Chongqing Chemdad Co., Ltd
Tel: +86-023-61398051 +8613650506873 , +8613650506873
Website: http://www.chemdad.com/
Company Name: Antai Fine Chemical Technology Co.,Limited
Tel: 18503026267 , 18503026267
Website: www.chemicalbook.com/ShowSupplierProductsList1980510/0.htm
Company Name: Hebei Mojin Biotechnology Co., Ltd
Tel: +8613288715578 , +8613288715578
Website: www.mojinchemical.com
Company Name: Hebei Yanxi Chemical Co., Ltd.
Tel: +8617531190177 , +8617531190177
Website: www.chemicalbook.com/manufacturer/hebei-yanxi-chemical-283/
Company Name: Hubei Ipure Biology Co., Ltd
Tel: +8613367258412 , +8613367258412
Website: www.ipurechemical.com
Company Name: Career Henan Chemica Co
Tel: +86-0371-86658258 15093356674; , 15093356674;
Website: https://www.coreychem.com/
Company Name: Hefei TNJ Chemical Industry Co.,Ltd.
Tel: 0551-65418671
Website: https://www.tnjchem.com
Tags:79-06-1 Related Product Information
79-10-7 924-42-5 110-26-9 2873-97-4 83-15-8 1251-85-0 941-69-5 50-76-0 4814-74-8 3229-73-0 83-07-8 60-80-0 6153-64-6 541-59-3 950-81-2 58-15-1 130929-57-6 2680-03-7