Chinese Japanese Germany Korea

Carbon Black

Production method Uses Identification test Content analysis Toxicity Use the limit Chemical properties Hazards & Safety Information
Carbon Black
Carbon Black structure
Chemical Name:
Carbon Black
Molecular Formula:
Formula Weight:
MOL File:

Carbon Black Properties

Melting point:
3550 °C(lit.)
Boiling point:
500-600 °C(lit.)
~1.7 g/mL at 25 °C(lit.)
vapor pressure 
<0.1 mm Hg ( 20 °C)
Flash point:
>230 °F
H2O: soluble0.1mg/mL
Clear colorless
Specific Gravity
bulk 0.10/g/cm3
Water Solubility 
Stable. Combustible.
EPA Substance Registry System
Carbon black(1333-86-4)
  • Risk and Safety Statements
  • Hazard and Precautionary Statements (GHS)
Hazard Codes  F,Xi,Xn
Risk Statements  36/37-18-11-40
Safety Statements  26-36-24/25-22-36/37
RIDADR  UN 1325 4.1/PG 3
WGK Germany  3
RTECS  FF5250100
HazardClass  4.1
PackingGroup  III
Hazardous Substances Data 1333-86-4(Hazardous Substances Data)
Signal word: Danger
Hazard statements:
Code Hazard statements Hazard class Category Signal word Pictogram P-Codes
H228 Flammable solid Flammable solids Category 1
Category 2
P210, P240,P241, P280, P370+P378
H350 May cause cancer Carcinogenicity Category 1A, 1B Danger
H351 Suspected of causing cancer Carcinogenicity Category 2 Warning P201, P202, P281, P308+P313, P405,P501
Precautionary statements:
P201 Obtain special instructions before use.
P210 Keep away from heat/sparks/open flames/hot surfaces. — No smoking.
P240 Ground/bond container and receiving equipment.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P281 Use personal protective equipment as required.
P308+P313 IF exposed or concerned: Get medical advice/attention.
P405 Store locked up.

Carbon Black price More Price(41)

Manufacturer Product number Product description CAS number Packaging Price Updated Buy
Sigma-Aldrich 699624 Carbon, mesoporous nanopowder, graphitized, <500 nm particle size (DLS), >99.95% trace metals basis 1333-86-4 5g $151 2018-11-13 Buy
Sigma-Aldrich 699624 Carbon, mesoporous nanopowder, graphitized, <500 nm particle size (DLS), >99.95% trace metals basis 1333-86-4 25g $434 2018-11-13 Buy
Alfa Aesar 010926 Carbon, activated, 2mm & down 1kg $126 2018-11-16 Buy
Alfa Aesar 010926 Carbon, activated, 2mm & down 100g $25.5 2018-11-16 Buy
Strem Chemicals 06-0025 Acetylene carbon black (100% compressed) 1333-86-4 250g $38 2018-11-13 Buy

Carbon Black Chemical Properties,Uses,Production

Production method

Natural gas tank method of making carbon black: take natural gas as raw material and use iron pipe to send it into the combustion chamber. The form of the combustion chamber can be either long and short and is made of iron plate. It contains a number of olefin burner inside it. Natural gas is sprayed with appropriate force from the burner nozzle and burned in the case of insufficient air, that is, to generate a bright and black smoke flame. The flame then goes directly into the channel iron with the distance between the burner and the slot surface being 65~80 mm. At this time, the temperature of olefin burning is reduced from about 1000 to 1400 ° C to about 500 ° C, and the carbon black is accumulated. The groove can move back and forth horizontally, with a moving speed of 3 to 4 mm/s. In order to maintain normal production, the required amount of air is about 2.5 to 3 times the theoretical calculation. The resulting carbon black was scraped into a funnel with a fixed doctor blade and sent to a central packing chamber for disposal. Then the carbon black is softened, filtered to remove the hard particles and scale and further sent into the mill grinding to enable more uniform thickness. However, the body is still very light and loose, thus should be shaken to a become a bit solid. Then add a small amount of water to the carbon black to make it into paste-like shape and have a small needle rotated inside it to forming micro-pellets, followed by drying to obtain the finished product. In the case of using pigment for carbon black, in order to facilitate the dispersion, the granulation is unnecessary. The process is as follows:
Raw gas, air → combustion cracking → collection → granulation → packaging → finished product.
Carbon black is one of the oldest industrial products. In ancient times, china has already applied incomplete combustion of vegetable oil for making pigment carbon black. In 1872, the United States first used natural gas as raw material to produce carbon black using tank method and mainly used it as a coloring agent. It was not until 1912 when Mott found the reinforcement effect carbon black on the rubber before the carbon black industry had gotten rapid development. Then it had successively developed of a variety of process methods. At present, oil furnace method is the most efficient and most economical method with the oil furnace black production amount accounting for  70-90% of the total carbon black production. There are mainly furnace, slot method, thermal cracking, three methods.
It is obtained by the carbonization of the plant material such as peat. It can also be derived from the carbonization of cocoa shell and beef bone or from the combustion of vegetable oil.


1.  It is edible black pigment. It can be used for pastry with the usage amount of 0.001% to 0.1%.
2.  It can be used for food coloring agent. China provides that it can be used for rice, flour products, candy, biscuits and pastries with the maximum usage amount of 5.0g/kg.
3.  Rubber industry uses it as a reinforcing filler. 2. Paint Inks applies it as coloring pigments in paint inks. 3. Used for the manufacturing of black paper such as packaging materials for photographic materials and the black paper made of high-conductivity black carbon in the radio equipment. 4. Carbon paper and typewriter; it is used when it is required for darker colors and can remain on the carrier. 5. Plastic coloring, ink, phonograph records, shoe polish, paint cloth, leather coatings, colored cement, electrodes, electronic brushes, batteries and so on.
4.  As electric conductive agent of lithium ion battery;
5.  Mainly used for rubber, paint, ink and other industries;
6.  Used for the reinforcement of car tread and sidewall, hose, groove, industrial rubber products as well as conveyor belt.
7.  Used for tire tread, surface tire repair, automotive rubber parts, conveyor belts, conveyor pads, etc., The vulcanized glue of this carbon black shows excellent tensile strength and abrasion resistance
8.  It is mainly used for the reinforcement of tire belt, sidewall, solid tires, outer layer of roller, hose surface, industrial rubber products and car tire tread.
9.  It is used for the reinforcement of the tire tread of car and truck, surface of conveyor belt and industrial rubber products.
10.  For rubber reinforcement, coloring agent, metallurgy, rocket propellant
11.  For rubber products to fill and reinforcement.
12.  For rubber products, carcass, valves and other filling .
13.  For paints and inks, plastics and other industries.
14.  Mainly used for raw materials of battery as well as for conductive and anti-static rubber products.
15.  In the rubber industry, it is used as the reinforcing agent and filter for the manufacturing of natural rubber and butyl rubber, being able to endow the vulcanized rubber with excellent tensile strength, elongation and tear resistance and so on. It should be mostly used for natural rubber-based large-scale engineering tires and a variety of off-road tires as well as being used for carcass and sidewall. In addition, it can also be used for high-strength conveyor belt, cold rubber products and drilling device. In light industry, it can be used as the filter of the paint, ink, enamel and plastic products.

Identification test

Solubility: being insoluble in water and organic solvents (OT-42)
Heated to red, burning without flames.

Content analysis

The sample was pre-dried at 120 ° C for 4 h and then measured by an instrument such as a C.H. O analyzer or subject to combustion/gravimetric analysis.


ADI has not yet been specified. It is listed as substance allowed to be in temporary contact with food, (FAO/WHO, 2000). It can not be digested and absorbed, so oral administration should be non-toxic, but given the incorporation of 3, 4-benzopyrene during the carbonization, it is basically not used now.

Use the limit

GB 2760-1996: Confectionery, biscuits, pastries, rice and flour products, 5.0 g/kg.
EEC provides for being used for concentrated fruit juice, jam, jelly, fruit wine.

Chemical properties

It appears as black powdery particles with a particle size of 0 to 500 μm. The relative density is 1.8 to 2.1. It is insoluble in water and organic solvents.

Hazards & Safety Information

Category Toxic substances
Toxicity classification Low toxicity
Acute Toxicity Oral-Rat LD50:> 15400 mg/kg
Explosives and hazardous characteristics being explosive upon dust and air mixture
Flammability and Hazardous characteristics It is combustible in case of heat and strong oxidant
Storage and transportation characteristics Treasury: low temperature, ventilated and dry
Fire extinguishing agent water, carbon dioxide, dry powder, foam
Occupational Standard TWA 3.5 mg/m3; STEL 7 mg/m3

Chemical Properties

finely divided black dust or powder

Chemical Properties

Carbon black (essentially elemental carbon), is a black or brown liquid or solid (powder). Odorless solid. Carbon black oil is flammable and has a petroleum odor.

Physical properties

Carbon black [1333-86-4] is virtually pure elemental carbon (diamond and graphite are other forms of nearly pure carbon) in the form of near-spherical colloidal particles that are produced by incomplete combustion or thermal decomposition of gaseous or liquid hydrocarbons. Its physical appearance is that of a black, finely divided pellet or powder, the latter sometimes small enough to be invisible to the naked eye. Its use in tires, rubber and plastic products, printing inks and coatings is related to the properties of specific surface area, particle size and structure, conductivity and color.
It is in the top 50 industrial chemicals manufactured worldwide, based on annual tonnage. Current worldwide production is about 15 billion pounds per year (6.81 million metric tons). Approximately 90% of carbon black is used in rubber applications, 9% as a pigment, and the remaining 1% as an essential ingredient in hundreds of diverse applications.
Modern carbon black products are direct descendants of early “lampblack”, first produced in China over 3500 years ago. These early lampblacks were not very pure and differed greatly in their chemical composition from current carbon blacks. Since the mid-1970s most carbon black has been produced by the oil furnace process, which is most often referred to as furnace black.
Unlike diamond and graphite, which are crystalline carbons, carbon black is an amorphous carbon composed of fused particles called aggregates. Properties, such as surface area, structure, aggregate diameter and mass differentiate the various carbon black grades.


Tire treads, belt covers, and other abrasion- resistant rubber products; plastics as a reinforc- ing agent, opacifier, electrical conductor, UV- light absorber; colorant for printing inks;carbon paper; typewriter ribbons; paint pigment; nucleat- ing agent in weather modification; expanders in bat- tery plates; solar-energy absorber (see note).


A finely divided form of carbon, practically all of which is made by burning vaporized heavy-oil frac- tions in a furnace with 50% of the air required for complete combustion (partial oxidation). This type is also called furnace black. Carbon black can also be made from methane or natural gas by crack- ing (thermal black) or direct combustion (channel black), but these methods are virtually obsolete. All types are characterized by extremely fine particle size, which accounts for their reinforcing and pig- menting effectiveness.


A finely divided form of carbon produced by the incomplete combustion of such hydrocarbon fuels as natural gas or petroleum oil. It is used as a black pigment in inks and as a filler for rubber in tire manufacture.


carbon black: A fine carbon powdermade by burning hydrocarbons in insufficientair. It is used as a pigmentand afiller (e.g. for rubber).


Possible carcinogen. Bronchitis.

Safety Profile

Mildly toxic by ingestion, inhalation, and skin contact. Questionable carcinogen. Mutation data reported. See also CARBON. A nuisance dust in high concentrations. We it is true that the tiny particulates of carbon black contain some molecules of carcinogenic materials, the carcinogens are apparently held tightly and are not eluted by hot or cold water, gastric juices, or blood plasma.

Potential Exposure

Used as reinforcing agent and filler for rubber; colorants for ink, paint, and plastics. Workers in carbon black production or in its use in rubber compounding, ink and paint manufacture, plastics compounding, drycell battery manufacture.

First aid

If this chemical gets into the eyes, remove any contact lenses at once and irrigate immediately for at least 15 minutes, occasionally lifting upper and lower lids. Seek medical attention immediately. If this chemical contacts the skin and PAH contamination is present, remove contaminated clothing and wash immediately with soap and water. Seek medical attention immediately. If this chemical has been inhaled, remove from exposure, begin rescue breathing (using universal precautions, including resuscitation mask) if breathing has stopped and CPR if heart action has stopped. Transfer promptly to a medical facility. When this chemical has been swallowed, get medical attention. Give large quantities of water and induce vomiting. Do not make an unconscious person vomit


Carbon black oil: UN1993 Flammable liquids, n.o.s., Hazard Class: 3; Labels: 3-Flammable liquid, Technical Name Required.


Carbon blacks containing over 8% volatiles may pose an explosion hazard. Dust can form an explosive mixture in air. A reducing agent; keep away from strong oxidizers, such as chlorates, bromates, nitrates.

Waste Disposal

Dump into a landfill or incinerate as a slurry.

Carbon Black Preparation Products And Raw materials

Raw materials

Preparation Products

Carbon Black Suppliers

Global( 219)Suppliers
Supplier Tel Fax Email Country ProdList Advantage
Henan DaKen Chemical CO.,LTD.
+86-371-55531817 CHINA 21914 58
Henan Tianfu Chemical Co.,Ltd.
0371-55170693 CHINA 20680 55
Mainchem Co., Ltd.
+86-0592-6210733 CHINA 32457 55
Shanghai Zheyan Biotech Co., Ltd.
18017610038 CHINA 3623 58
Hebei Huanhao Biotechnology Co., Ltd.
86-0311-83975816 whatsapp +8618034554576
86-0311-83975816 CHINA 701 58
Chemwill Asia Co.,Ltd.
86-21-51861608;;; CHINA 23982 58
Haihang Industry Co.,Ltd
+86 531 8582 1093 CHINA 4660 58
hdzhl biotechnology co., ltd
86-13032617415 CHINA 734 58
J & K SCIENTIFIC LTD. 400-666-7788 +86-10-82848833
+86-10-82849933; China 96815 76
Meryer (Shanghai) Chemical Technology Co., Ltd. +86-(0)21-61259100(Shanghai) +86-(0)755-86170099(ShenZhen) +86-(0)10-62670440(Beijing)
+86-(0)21-61259102(Shanghai) +86-(0)755-86170066(ShenZhen) +86-(0)10-88580358(Beijing) China 40277 62

View Lastest Price from Carbon Black manufacturers

Image Release date Product Price Min. Order Purity Supply Ability Manufacturer
2019-04-05 Carbon Black
US $1.00 / kg 1kg 99% High quality Factory Chemwill Asia Co.,Ltd.
2018-09-18 carbon black
US $5.00 / KG 1KG 99% 20T Hebei Huanhao Biotechnology Co., Ltd.
2018-05-24 Carben black
US $200.00 / KG 25KG 99.99% 50tons/month China Chemical Lab

1333-86-4(Carbon Black)Related Search:

Copyright 2017 © ChemicalBook. All rights reserved