ChemicalBook
Chinese Japanese Germany Korea

p-Cresol

description Chemical properties Uses Production method Toxicity Usage limit
p-Cresol
p-Cresol structure
CAS No.
106-44-5
Chemical Name:
p-Cresol
Synonyms
1PO;4-Cresol;p-Kresol;p-Toluol;P-CRESOL;FEMA 2337;Paracresol;para-cresol;KRESOL-PARA;4-Cresol99%
CBNumber:
CB5453502
Molecular Formula:
C7H8O
Formula Weight:
108.14
MOL File:
106-44-5.mol

p-Cresol Properties

Melting point:
32-34 °C(lit.)
Boiling point:
202 °C(lit.)
Density 
1.034 g/mL at 25 °C(lit.)
vapor density 
3.72 (vs air)
vapor pressure 
1 mm Hg ( 20 °C)
refractive index 
nD20 1.5395
FEMA 
2337 | P-CRESOL
Flash point:
193 °F
storage temp. 
2-8°C
solubility 
20g/l
pka
10.17(at 25℃)
form 
Crystalline Solid or Liquid
Specific Gravity
1.0341 (20/4℃)
color 
Colorless to light yellow, may darken on exposure to light
explosive limit
1%(V)
Water Solubility 
20 g/L (20 ºC)
Sensitive 
Light Sensitive
Merck 
14,2579
JECFA Number
693
BRN 
1305151
Henry's Law Constant
6.17 at 20.00 °C, 9.31 at 25.00 °C (dynamic equilibrium system-GC, Feigenbrugel et al., 2004a)
Exposure limits
NIOSH REL: TWA 2.3 ppm (10 mg/m3), IDLH 250 ppm; OSHA PEL: TWA 5 ppm (22 mg/m3); ACGIH TLV: TWA for all isomers 5 ppm (adopted).
Stability:
Stable. Combustible. Incompatible with strong oxidizing agents. Air and light-sensitive. Hygroscopic.
CAS DataBase Reference
106-44-5(CAS DataBase Reference)
NIST Chemistry Reference
Phenol, 4-methyl-(106-44-5)
EPA Substance Registry System
Phenol, 4-methyl-(106-44-5)
SAFETY
  • Risk and Safety Statements
Symbol(GHS) 
GHS05,GHS06,GHS08
Signal word  Danger
Hazard statements  H351-H372-H373-H401-H412-H301+H311-H314-H301-H311-H331-H370-H318
Precautionary statements  P201-P202-P264-P270-P273-P301+P330+P331+P310-P303+P361+P353+P310+P363-P307+P311-P405-P501-P280-P301+P310-P305+P351+P338-P310-P260-P311-P303+P361+P353-P304+P340+P310-P305+P351+P338+P310-P260h-P301+P310a-P501a
Hazard Codes  T,Xi
Risk Statements  24/25-34-39/23/24/25-23/24/25
Safety Statements  36/37/39-45-36/37
RIDADR  UN 3455 6.1/PG 2
WGK Germany  1
RTECS  GO6475000
8
Autoignition Temperature 555 °C
Hazard Note  Irritant
TSCA  Yes
HazardClass  6.1
PackingGroup  II
HS Code  29071200
Toxicity LD50 orally in rats: 1.8 g/kg (Deichmann, Witherup)

NFPA 704

Diamond Hazard Value Description
2
0
Health  
Flammability   2 Must be moderately heated or exposed to relatively high ambient temperature before ignition can occur and multiple finely divided suspended solids that do not require heating before ignition can occur. Flash point between 37.8 and 93.3 °C (100 and 200 °F). (e.g. diesel fuel, sulfur)
Instability   0 Normally stable, even under fire exposure conditions, and is not reactive with water (e.g. helium,N2)
Special  

(NFPA, 2010)

p-Cresol price More Price(23)

Manufacturer Product number Product description CAS number Packaging Price Updated Buy
Sigma-Aldrich 42429 p-Cresol analytical standard 106-44-5 5g-f $26.3 2018-11-13 Buy
Sigma-Aldrich 40252-U 4-Methylphenol solution certified reference material, 5000 μg/mL in methanol 106-44-5 u $44.6 2018-11-13 Buy
TCI Chemical C0400 p-Cresol >99.0%(GC) 106-44-5 25g $17 2018-11-22 Buy
TCI Chemical C0400 p-Cresol >99.0%(GC) 106-44-5 500g $33 2018-11-22 Buy
Alfa Aesar A13531 p-Cresol, 99% 106-44-5 100g $20.6 2018-11-13 Buy

p-Cresol Chemical Properties,Uses,Production

description

p-Cresol is a low-molecular-weight compound, is a starting material in the synthesis of bupranolol which is a non-selective beta blocker.
p-cresol is found in extracts from the plants Mentha pulegium and Hedeoma pulegioides, commonly known as pennyroyal oil and pennyroyal tea. These extracts are popular as unconventional herbal therapeutic agents and are applied as abortiva, diaphoretics, emmenagogues, and psychedelic drugs. Pennyroyal oil is extensively used for its pleasant mint-like smell in the flavoring industry.
It is also used in the production of antioxidants like butylated hydroxytoluene. Furthermore, it is used as an adhesive and a sealant in chemicals, dyes, intermediates, odor agents, plasticizers, plating agents and surface treating agents. It acts as an antioxidant and a disinfectant in pharmaceuticals.

Chemical properties

It appears as colorless to pink crystal with smoked and herbal smell. The relative density (d420) is 1.0178; the refractive index (nD20) is 1.5312; the melting point is 34.8 °C; the boiling point is 201.9 °C and the flash point is 86.1 °C. It is soluble in water (2.3%/40 ℃), easily soluble in caustic soda and common organic solvents.
Natural products exist in ylang oil, strawberry, cheese, coffee and cocoa and so on.

Uses

1. It can be used as germicide, fungicide. Used for organic Synthesis.
2. This product is the raw material for the manufacture of antioxidant 2,6-di-tert-butyl-p-cresol and rubber antioxidant. At the same time, it is also an important fundamental raw material for the production of pharmaceutical TMP and dyes para-Cresidine sulfonic acid.
3. P-cresol is the intermediate for the manufacturing of fungicide methylphosophos, an insecticide flufenvalerate, and Etofenprox, but also the intermediate of antioxidant additives 2, 6-di-tert-butyl-4-methyl phenol and p-hydroxybenzene formaldehyde.
4. It can be used as raw materials for the preparation of antioxidant 264 (2, 6-di-tert-butyl-p-cresol) and rubber antioxidant. In the plastics industry, it can produce phenolic resin and plasticizer. In medicine, it can be used as a disinfectant. In addition, it can be used as the raw materials of dyes and pesticides.

Production method

1. The mother liquor of using the para, m-cresol mixture for the extraction of m-cresol can be subject to recrystallization using oxalic acid addition method. 2. Toluene and sulfuric acid can be subject to sulfonation and neutralization to generate sodium p-toluenesulfonate followed by alkali melting, acidification and distillation to get the finished product p-cresol. In order to obtain high purity p-cresol, there are two processes: (1) the distilled p-cresol is subject to further crystallization and separation; (2) the p-toluenesulfonic acid after sulfonation is further subject to cooling, crystallization, filtration, and then neutralization, alkali melting, acidification and distillation to derive the products.
The Nanjing Jinyan Chemical Corporation has developed mature sulfonated alkali melting technology, being able to produce high purity p-cresol. With changing the process conditions, the same device can also enable the production of m-cresol, o-cresol, phenol, and naphthol.
There are several preparation methods as follows.
(1) Toluene sulfonation alkali melting method
The sulfonation reaction is carried out at 110-130 °C using toluene as raw material to produce intermediate toluene sulfonic acid. After neutralization, it further has alkali melting reaction with the molten sodium hydroxide at 340-365 °C to obtain Cresol sodium which further converts to crude cresol after the acidification, followed by distillation for separation of o-cresol and phenol, to get the mixed p-, m-cresol with p-cresol being the major part. The composition of isomers in cresol was determined by the temperature, the type of sulfonating agent and the ratio of toluene to sulfonating agent. Nanjing Jinyan Chemical Corporation can produce high purity p-cresol by sulfonation alkali fusion. Commonly used sulfonating agents also include fuming sulfuric acid and chlorosulfonic acid.
Preparation of p-cresol by toluene sulfonation is the earliest industrial process, this method is more mature, but need to consume a lot of acid, alkali, equipment corrosion problems. This method is currently still the main method of production of p-cresol.
The mother liquor of p-, m-cresol mixture after extraction of m-cresol can be subject to recrystallization using oxalic acid addition method. For example, the urea can be heated together with the filtered toluene solution to 95~100 ° C. Further add under stirring of oxalic acid for reaction of 2~3h, and then cooled at room temperature for about 16h, with vacuum filtration to obtain the white crystals, namely the p-cresol oxalic acid complex. The complex was decomposed with hot water. The supernatant oil layer was firstly distilled to toluene and steamed, followed by cutting the 93-104 ° C fraction at 0.094 MPa to obtain the p-cresol with a purity of 95%.
 (2) p-toluidine diazo hydrolysis method
P-toluidine can react with sulfuric acid to form p-toluidine sulfate, further subject to sodium nitrite diazotization at 0~5 ℃. The diazonium salt is put into the dilute sulfuric acid for heating hydrolysis and the oil product is further separated out by the steam. The oil layer is further added into the 1% sodium hydroxide, followed by decolorization filtering. Add concentrated sulfuric acid to pH = 1, and then separate out the water layer, add zinc powder and sulfuric acid, and then neutralize to neutral with sodium carbonate; separate the oil product; wash, and then apply vacuum distillation to get the finished product.
(3) Separation of kerosene derived
Apply sulfuric acid for the sulfonation of toluene to obtain p-toluenesulfonic acid, followed by cooling, crystallization, filtration, and then addition of sodium sulfite for neutralization to obtain the sodium p-toluene sulfonate, with further sulfide acidification to derive the final product which is finally subject to distillation and crystallization separation.

Toxicity

Central nervous system: toxic effects with being fatal in severe cases.
LD50:1800 mg/kg (rat, oral);
As fragrances, it can be safely used in food (FDA, §172.515, 2000);
GRAS (FEMA).

Usage limit

FEMA (mg/kg): soft drinks 0.67; cold drinks 0.01 to 1.0; candies and baked goods 0.01 to 2.0.

Chemical Properties

Colorless to pink crystals with a phenolic odor. Odor threshold concentration in water is 55 ppb (Buttery et al., 1988). An experimentally determined odor threshold concentration of 1 ppbv was reported by Leonardos et al. (1969) which exceeds the odor threshold concentration of 0.054 ppbv reported by Nagata and Takeuchi (1990).

Chemical Properties

Cresol is a mixture of the three isomeric cresols, o-, m-, and p-cresol. Cresols are slightly soluble in water. m-Isomer: Colorless or yellow liquid with characteristic odor.

Chemical Properties

p-Cresol has a characteristics phenol-like odor.

Physical properties

Colorless to pink crystals with a phenolic odor. Odor threshold concentration in water is 55 ppb (Buttery et al., 1988). An experimentally determined odor threshold concentration of 1 ppbv was reported by Leonardos et al. (1969) which exceeds the odor threshold concentration of 0.054 ppbv reported by Nagata and Takeuchi (1990).

Uses

Intermediates of Liquid Crystals

Uses

p-Cresol is used in the synthesis of Bupranolol (B689650), a non-selective beta blocker.

Uses

For making synthetic resins; in disinfectants and fumigants; as industrial solvent; m-cresol in photographic developers, explosives.

Definition

ChEBI: A cresol that consists of toluene substituted by a hydroxy group at position 4. It is a metabolite of aromatic amino acid metabolism produced by intestinal microflora in humans and animals.

Preparation

It can be prepared by fractional distillation of coal tar where it occurs together with the ortho- and para- isomers.

Aroma threshold values

Detection: 55 to 100 ppb.

General Description

Colorless solid with a tar like odor. Sinks and mixes slowly with water.

Air & Water Reactions

Insoluble in water.

Reactivity Profile

p-Cresol is sensitive to heat. p-Cresol is also sensitive to light. p-Cresol is incompatible with strong oxidizers and strong alkalis. p-Cresol will attack some forms of plastics, coatings and rubber.

Hazard

Questionable carcinogen.

Health Hazard

INHALATION: Irritation of nose or throat. EYES: Intense irritation and pain, swelling of conjunctiva and corneal damage may occur. SKIN: Intense burning, loss of feeling, white discoloration and softening. Gangrene may occur. INGESTION: Burning sensation in mouth and esophagus. Vomiting may result. Absorption by all routes may cause muscular weakness, gastroenteric disturbance, severe depression and collapse. Effects are primarily on central nervous system, edema of lungs, injury of spleen and pancreas may occur.

Safety Profile

Poison by ingestion, skin contact, subcutaneous, intravenous, and intraperitoneal routes. A severe skin and eye irritant. Questionable carcinogen with experimental neoplastigenic data by itself and with 7,12-dirnethyl benz(a)anthracene. Combustible when exposed to heat or flame. Moderately explosive in the form ofvapor when exposed to heat or flame. To fight fire, use CO2, dry chemical, alcohol foam. See also other cresol entries and PHENOL.

Potential Exposure

Cresol is used as a disinfectant and fumigant; as an ore flotation agent, and as an intermediate in the manufacture of chemicals, dyes, plastics, and antioxidants. A mixture of isomers is generally used; the concentrations of the components are determined by the source of the cresol.

Source

As 3+4-methylphenol, detected in distilled water-soluble fractions of 87 octane gasoline (6.03 mg/L), 94 octane gasoline (0.60 mg/L), Gasohol (1.76 mg/L), No. 2 fuel oil (1.84 mg/L), jet fuel A (0.43 mg/L), diesel fuel (1.318 mg/L), and military jet fuel JP-4 (0.92 mg/L) (Potter, 1996).
A high-temperature coal tar contained 4-methylphenol at an average concentration of 0.27 wt % (McNeil, 1983).
Occurs naturally in brown juniper, Spanish cedar, peppermint (2 to 20 ppb), tarragon, asparagus shoots, ylang-ylang, jasmine, tea leaves, coffee beans, Japanese privet, white mulberries, raspberries, vanilla, blueberries, sour cherries, anise, and tamarind (Duke, 1992).
A liquid swine manure sample collected from a waste storage basin contained 4-methylphenol at a concentration of 4.9 mg/L (Zahn et al., 1997).

Environmental Fate

Biological. Protocatechuic acid (3,4-dihydroxybenzoic acid) is the central metabolite in the bacterial degradation of 4-methylphenol. Intermediate by-products include 4-hydroxybenzyl alcohol, 4-hydroxybenzaldehyde, and 4-hydroxybenzoic acid. In addition, 4-methylphenol may undergo hydroxylation to form 4-methylcatechol (Chapman, 1972). Chloroperoxidase, a fungal enzyme isolated from Caldariomyces fumago, reacted with 4-methylphenol forming 4-methyl-2- chlorophenol (Wannstedt et al., 1990). Under methanogenic conditions, inocula from a municipal sewage treatment plant digester degraded 4-methylphenol to phenol prior to being mineralized to carbon dioxide and methane (Young and Rivera, 1985).
Photolytic. Photooxidation products reported include 2,2′-dihydroxy-4,4′-dimethylbiphenyl, 2- hydroxy-3,4′-dimethylbiphenyl ether, and 4-methylcatechol (Smith et al., 1978). Anticipated products from the reaction of 4-methylphenol with ozone or OH radicals in the atmosphere are hydroxynitrotoluene and ring cleavage compounds (Cupitt, 1980). Absorbs UV light at a maximum wavelength of 278 nm (Dohnal and Fenclová, 1995).
Chemical/Physical. Kanno et al. (1982) studied the aqueous reaction of 4-methylphenol and other substituted aromatic hydrocarbons (toluidine, 1-naphthylamine, phenol, 2- and 3- methylphenol, pyrocatechol, resorcinol, hydroquinone, and 1-naphthol) with hypochlorous acid in the presence of ammonium ion. They reported that the aromatic ring was not chlorinated as expected but was cleaved by chloramine forming cyanogen chloride. The amount of cyanogen chloride formed was increased as the pH was lowered (Kanno et al., 1982).

Shipping

UN2076 Cresols, liquid, Hazard class: 6.1; Labels: 6.1-Poisonous materials, 8-Corrosive material. UN3455 Cresols, solid, Hazard class: 6.1; Labels: 6.1- Poisonous materials, 8-Corrosive material.

Purification Methods

It can be separated from m-cresol by fractional crystalisation of its melt. Purify it by distillation, by precipitation from *benzene solution with pet ether, and via its benzoate, as for phenol. Dry it under vacuum over P2O5. It has also been crystallised from pet ether (b 40-60o) and by conversion to sodium p-cresoxyacetate which, after crystallisation from water is decomposed by heating with HCl in an autoclave [Savard Ann Chim (Paris) 11 287 1929]. The 3,5-dinitrobenzoate (prepared with 3,5-dinitrobenzoyl chloride in dry pyridine, and recrystallised from EtOH or aqueous Me2CO) has m 189o. [Beilstein 6 II 2093.]

Incompatibilities

Vapors may form explosive mixture with air. Incompatible with strong acids; oxidizers, alkalies, aliphatic amines; amides, chlorosulfonic acid; oleum. Decomposes on heating, producing strong acids and bases, causing fire and explosion hazard. Liquid attacks some plastics and rubber. Attacks many metals.

Waste Disposal

Wastewaters may be subjected to biological treatment. Concentrations may be further reduced by ozone treatment. High concentration wastes may be destroyed in special waste incinerators.

p-Cresol Preparation Products And Raw materials

Raw materials

Preparation Products


p-Cresol Suppliers

Global( 266)Suppliers
Supplier Tel Fax Email Country ProdList Advantage
Capot Chemical Co.,Ltd.
+86 (0)571-855 867 18
+86 (0)571-858 647 95 sales@capotchem.com China 19918 60
Shanghai Time Chemicals CO., Ltd.
+86-021-57951555
+86-021-57951555 jack.li@time-chemicals.com CHINA 1365 55
Mainchem Co., Ltd.
+86-0592-6210733
+86-0592-6210733 sales@mainchem.com CHINA 32447 55
career henan chemical co
+86-371-86658258
sales@coreychem.com CHINA 30002 58
Chemwill Asia Co.,Ltd.
86-21-51086038
86-21-51861608 chemwill_asia@126.com;sales@chemwill.com;chemwill@hotmail.com;chemwill@gmail.com CHINA 23976 58
Hubei Jusheng Technology Co.,Ltd.
86-18871470254
027-59599243 sales@jushengtech.com CHINA 28236 58
Haihang Industry Co.,Ltd
86-531-88032799
+86 531 8582 1093 export@haihangchem.com CHINA 8921 58
Xiamen AmoyChem Co., Ltd
+86 592-605 1114
sales@amoychem.com CHINA 6372 58
Hubei xin bonus chemical co. LTD
86-13657291602
027-59338440 sales@guangaobio.com CHINA 23049 58
Shandong chuangyingchemical Co., Ltd.
13156170209
sale@chuangyingchem.com CHINA 4405 58

View Lastest Price from p-Cresol manufacturers

Image Release date Product Price Min. Order Purity Supply Ability Manufacturer
2018-08-09 p-Cresol
106-44-5
US $2.00 / KG 1KG 99% Customise career henan chemical co

p-Cresol Spectrum


106-44-5(p-Cresol)Related Search:


Copyright 2017 © ChemicalBook. All rights reserved